Dell Technologies PowerFlex Design (D-PWF-DS-01) Certification Sample Questions

PowerFlex Design Dumps, D-PWF-DS-01 Dumps, D-PWF-DS-01 PDF, PowerFlex Design VCE, Dell Technologies D-PWF-DS-01 VCE, Dell Technologies PowerFlex Design PDFThe purpose of this Sample Question Set is to provide you with information about the Dell Technologies PowerFlex Design exam. These sample questions will make you very familiar with both the type and the difficulty level of the questions on the D-PWF-DS-01 certification test. To get familiar with real exam environment, we suggest you try our Sample Dell Technologies PowerFlex Design Certification Practice Exam. This sample practice exam gives you the feeling of reality and is a clue to the questions asked in the actual Dell Technologies Certified PowerFlex Design certification exam.

These sample questions are simple and basic questions that represent likeness to the real Dell Technologies D-PWF-DS-01 exam questions. To assess your readiness and performance with real time scenario based questions, we suggest you prepare with our Premium Dell Technologies PowerFlex Design Certification Practice Exam. When you solve real time scenario based questions practically, you come across many difficulties that give you an opportunity to improve.

Dell Technologies D-PWF-DS-01 Sample Questions:

01. An on-premises customer expects compute and storage demand to grow together and wants the smallest number of node types and the simplest footprint. Which PowerFlex deployment architecture fits?
a) A public-cloud deployment in AWS or Azure
b) Compute-only nodes attached to an external storage array
c) Hyperconverged, with SDS and SDC on every node
d) Two-layer, with storage-only and compute-only nodes
 
02. An online publisher wants RAM Read Cache for a read-heavy PowerFlex 4.x storage pool that serves its content databases. The architect has enabled RMcache at the storage pool level in the design. What else must be in place for reads to be cached in the RAM of a particular SDS?
a) Write Handling Mode set to PassThrough
b) An SDPM or NVDIMM acceleration pool assigned to that storage pool too
c) Nothing more: pool-level enablement covers every SDS and volume in it
d) RMcache enabled on that SDS, and the volume configured to use it
 
03. Before proposing a PowerFlex design, an architect assesses the customer's current environment so the new system fits into it. Which three findings must this current-state assessment capture?
(Choose three)
a) The hypervisors and operating systems the hosts run today
b) The workloads that will move to PowerFlex and how they behave
c) The existing network fabric and switching
d) The PowerFlex Manager role each administrator will be assigned
 
04. A customer is sizing PowerFlex volumes for several applications. What are the minimum and maximum volume sizes supported in PowerFlex?
a) Minimum: 10 GB Maximum: 1 PB
b) Minimum: 8 GB Maximum: 10 PB
c) Minimum: 10 GB Maximum: 10 PB
d) Minimum: 8 GB Maximum: 1 PB
 
05. For a storage pool with ten or more SDSs, what is the minimum spare capacity percentage that Dell advises?
a) 12%
b) 11%
c) 10%
d) 15%
 
06. A Dell partner runs a technical workshop to capture a customer's capacity, performance, growth, availability and recovery requirements. No node models have been selected yet. In which phase of the solution design process does this activity belong?
a) Plan
b) Validate
c) Implement
d) Design
 
07. A media company runs a PowerFlex 4.x protection domain of older storage nodes with SAS SSDs and 25 GbE networking. It needs more capacity and is buying current-generation NVMe storage nodes with 100 GbE. The project lead wants to add them to the existing protection domain because PowerFlex Manager accepts them there. What should the architect advise?
a) Retire all the older nodes first, as two node generations cannot share a system
b) Place the new nodes in their own protection domain, as the slowest node sets mixed performance
c) Add them to the existing domain, since PowerFlex Manager would block any mix it does not support
d) Add them to the existing pool, as the SDC sends more I/O to faster nodes
 
08. PowerFlex Manager reports degraded capacity in a storage pool after a node rebooted unexpectedly. Where should the engineer begin troubleshooting?
a) Increase the spare capacity percentage of the storage pool
b) Run a full update of the resource group to the latest catalog
c) Remove the node with Delete Resource and redeploy it
d) Check PowerFlex Manager alerts, events and resource health
 
09. A biotech startup ran a PowerFlex 4.x proof of concept with a single-node MDM. It now wants to keep the same servers for production and asks for the smallest MDM configuration that Dell recommends for production use. Which MDM cluster configuration should the architect specify?
a) Three-node cluster: primary, secondary and tiebreaker
b) Five-node cluster: primary, two secondaries and two tiebreakers
c) Single-node MDM protected by nightly PowerFlex Manager backups
d) Two-node cluster: primary and secondary MDM
 
10. A PowerFlex design uses CloudLink for data-at-rest encryption. For which component does the CloudLink Agent unlock the encrypted drives?
a) SDC
b) SDS
c) MDM
d) SDT

Answers:

Question: 01
Answer: c
Question: 02
Answer: d
Question: 03
Answer: a, b, c
Question: 04
Answer: d
Question: 05
Answer: c
Question: 06
Answer: a
Question: 07
Answer: b
Question: 08
Answer: d
Question: 09
Answer: a
Question: 10
Answer: b

Note: For any error in Dell Technologies Certified PowerFlex Design (D-PWF-DS-01) certification exam sample questions, please update us by writing an email on feedback@edusum.com.

Rating: 5 / 5 (78 votes)