Dell Technologies PowerEdge Foundations (D-PE-FN-01) Certification Sample Questions

PowerEdge Foundations Dumps, D-PE-FN-01 Dumps, D-PE-FN-01 PDF, PowerEdge Foundations VCE, Dell Technologies D-PE-FN-01 VCE, Dell Technologies PowerEdge Foundations PDFThe purpose of this Sample Question Set is to provide you with information about the Dell Technologies PowerEdge Foundations exam. These sample questions will make you very familiar with both the type and the difficulty level of the questions on the D-PE-FN-01 certification test. To get familiar with real exam environment, we suggest you try our Sample Dell Technologies PowerEdge Foundations Certification Practice Exam. This sample practice exam gives you the feeling of reality and is a clue to the questions asked in the actual Dell Technologies Certified PowerEdge Foundations certification exam.

These sample questions are simple and basic questions that represent likeness to the real Dell Technologies D-PE-FN-01 exam questions. To assess your readiness and performance with real time scenario based questions, we suggest you prepare with our Premium Dell Technologies PowerEdge Foundations Certification Practice Exam. When you solve real time scenario based questions practically, you come across many difficulties that give you an opportunity to improve.

Dell Technologies D-PE-FN-01 Sample Questions:

01. A component inside a Dell PowerEdge server has a blue touch point. Which type of replacement does that component require?
a) Warm swap
b) Hot swap
c) Cold swap
d) Blind swap
 
02. A hospital wants to implement hardware-based security on one of its web servers. Which implementation meets this requirement?
a) TPM
b) Digital signing
c) DNS role
d) DHCP service
 
03. A system administrator wants to remove the operating system on a Dell PowerEdge rack server and install a newer version from a remote workstation. The server's iDRAC is already configured correctly. Which combination of tools does the administrator need for this operation?
a) iSM, Repository Manager, and Virtual Console
b) iDRAC, SupportAssist, and Virtual Console
c) iDRAC, Virtual Console, and Virtual Media
d) iDRAC, OMSA, and iSM
 
04. Which set lists interfaces that Dell PowerEdge servers use to connect mass storage devices?
a) SSID, DVI, USB, and SAS
b) SAS, SATA, USB, and Ethernet
c) USB, Ethernet, SSD, and DVI
d) Ethernet, SSID, DVI, and SAS
 
05. An administrator is implementing LTO tape drives in a backup solution and plans to disable hardware data compression through the backup appliance. What is the effect of this change?
a) Hardware encryption on the drive is disabled at the same time
b) The drive can no longer read cartridges that were written with compression
c) Data is written at the drive's native rate and native capacity
d) Data is written at the higher compressed transfer rate quoted for the drive
 
06. What is an example of a data archive?
a) Current and critical production data that resides in a server’s primary storage
b) Internal business policies and procedures that staff consult every day
c) Data that is corrupted, changed or logged incorrectly
d) File and mail account data for a user that left an organization one month ago
 
07. Users report slow responses from a web application server. Monitoring shows the network adapter at 30% utilization, CPU at 25%, and the storage queue for the data drives constantly full, with high latency. Where in the server data path is the bottleneck?
a) The processors, because they execute the application code
b) The memory channels, because memory sits between every component
c) The storage subsystem serving the data drives
d) The network adapter, because all requests arrive through it
 
08. A data center technician is informed of a hardware problem on a server. The technician is asked to physically inspect the server without rebooting the operating system. Which troubleshooting step can the technician perform to diagnose the fault further?
a) Run a remote inventory from OpenManage Enterprise
b) Review the LCD front panel display
c) Update the BIOS
d) Access the Lifecycle Controller
 
09. Which RAID level introduces a state called "partially degraded" when a single drive failure occurs?
a) RAID 6
b) RAID 1
c) RAID 5
d) RAID 0
 
10. Data redundancy is not required for a scratch volume. Which RAID level is recommended for high-speed data access and maximum storage capacity?
a) RAID 6
b) RAID 1
c) RAID 5
d) RAID 0

Answers:

Question: 01
Answer: c
Question: 02
Answer: a
Question: 03
Answer: c
Question: 04
Answer: b
Question: 05
Answer: c
Question: 06
Answer: d
Question: 07
Answer: c
Question: 08
Answer: b
Question: 09
Answer: a
Question: 10
Answer: d

Note: For any error in Dell Technologies Certified PowerEdge Foundations (D-PE-FN-01) certification exam sample questions, please update us by writing an email on feedback@edusum.com.

Rating: 4.9 / 5 (88 votes)