Riverbed RCSA-NPM (201-01) Certification Sample Questions

The purpose of this Sample Question Set is to provide you with information about the Riverbed Certified Solutions Associate - Network Performance Management exam. These sample questions will make you very familiar with both the type and the difficulty level of the questions on the 201-01 certification test. To get familiar with real exam environment, we suggest you try our Sample Riverbed RCSA-NPM Certification Practice Exam. This sample practice exam gives you the feeling of reality and is a clue to the questions asked in the actual Riverbed Certified Solutions Associate - Network Performance Management certification exam.

These sample questions are simple and basic questions that represent likeness to the real Riverbed 201-01 exam questions. To assess your readiness and performance with real time scenario based questions, we suggest you prepare with our Premium Riverbed RCSA-NPM Certification Practice Exam. When you solve real time scenario based questions practically, you come across many difficulties that give you an opportunity to improve.

Riverbed 201-01 Sample Questions:

01. Which of the following defines cascade Services?

a) Servers and Applications

b) Clients, Servers and Ports

c) Front-end and Back-end tiers

d) Components and Segments

e) Web, Application and Database tiers

 

02. In the Cascade Profiler GUI, which of the following Host Group Types are available as default examples?

(Select 2)

a) ByLocation

b) ByHostGroup

c) ByPortsAndApplications

d) ByFunction

e) ByTimeZone

 

03. What is the maximum number of 1G capture ports that can be provisioned on the Shark appliance model CSK-03200?

a) 2

b) 4

c) 6

d) 8

e) 12

 

04. Cascade Sensors:

(Select 3)

a) Use mirror ports or passive taps to collect data from a network segment

b) Can forward packets to other network management systems

c) Provide deep packet inspection to identify the application being accessed by a host

d) Can decrypt secure protocols

e) Communicate with Profiler appliance using compressed and encrypted data

 

05. When Flow Data is being forwarded from a __________ to another Flow Collector it is _________.

a) Sensor, Compressed

b) Cascade Profiler; sent in its original form

c) Cascade Express; sent de-duplicated

d) Cascade Express; sent in its original form

e) Cascade Gateway; de-duplicated

f) Cascade Gateway; sent in its original form

 

06. You can apply a View within Cascade Pilot to a trace clip:

a) If both the trace clip and View support indexing.

b) If the trace clip is not indexed and the View does not support indexing.

c) Any time you like.

d) If the capture job is running.

 

07. From the Quick Report below, which choice should be used if you want to create a report based on a subnet address (e.g. 192.168.1.0/24)?

a) Host/Group

b) IP Address/Subnet

c) Interface/Device

d) Network

 

08. In the Cascade Profiler GUI, how frequently is the dashboard refreshed by default?

a) Every 15 seconds

b) Every 15 minutes

c) Every 5 minutes

d) Every 1 minute

e) Every 1 hour

 

09. What is the maximum number of flows that can be sent from a remote device (Sensor/Gateway) to an Express Profiler?

a) 25,000 flows per minute

b) 50,000 flows per minute

c) Not limited by flow rate. Limited by number of devices sending flow

d) 100,000 flows per minute

e) Limited by the Profiler license limit

 

10. A filter can be created in Cascade Pilot:

a) importing 

b) By saving the filter applied in a View.

c) Only when you are connected to a Cascade Shark.

d) Only before applying a View.

Answers:

Note: For any error in Riverbed Certified Solutions Associate - Network Performance Management (201-01) certification exam sample questions, please update us by writing an email on feedback@edusum.com.